If the carpet in your house has stayed the same for many years, it’s bound to become soiled or worn off. And nobody likes to look at a rug that has started to show visible signs of damage.
Unfortunately, no specific rule will tell you when to remove your existing carpet and install a new one.
For example, the average carpet can last anywhere from 5 to 15 years in Australia.
So, if you feel that your carpet has lived enough and want to be removed for a better one, here are some tips on how to do the task efficiently.
1. Clear the space
The first thing you must do to remove the existing carpet is clear the space. So, you must shift all furniture and other items on the carpet.
If you have large items, such as a sofa set, wardrobe, or even antique pieces, moving everything by yourself can be a little difficult.
Ask for help from your family members and neighbors, or choose a professional.
However, remember that you don’t always have to do everything yourself. So, if you’re looking for a reliable company to help remove the carpet and clean the area underneath, Metro Defits is the best company out there.
2. Figure out the disposal method
Simply removing the carpet isn’t enough; you also have to consider the old carpet’s disposal method.
You might be surprised to hear that getting rid of an old carpet can cost you a little bit of money, so check all your options first.
For example, you can ask a professional befitting or interior designing company to take out the carpet and incorporate it in their final bill.
Otherwise, you can simply take it out yourself and throw it in the trash, where you generally discard mid or large-sized things. Further, make sure you have hauling services readily available.
3. Detach the carpet from the strip
The process isn’t very fancy when it comes to removing the carpet. With a bit of practice, you can detach the carpet yourself without any external help. However, this will work best if the carpet itself is in a small room.
You will notice the carpet attached to the room through tack strips running across its perimeter. To detach it, first, grab any corner with the help of pliers and give a gentle pull.
If the carpet comes up easily, you can pull up the rest using your bare hands. Otherwise, use a utility knife to cut a small square in the corner. Remove this piece and pull up the carpet.
4. Vacuum the old carpet
Before removing the carpet, you might want to clean and vacuum it a little. This will help you cut down on dust, making the carpet removal process much easier.
If you see too much dust or dirt coming out of the carpet, wear a face mask and a pair of gloves. Your gloves will also protect your hands from the sharp staples that hold the carpet to the tack.
Moreover, make sure to wear sturdy shoes with thick soles. They will protect your feet from getting dirty and prevent injury even if you step on a tack strip or a rough carpet edge.
5. Remove the carpet pad
Many carpets often have carpet pads to provide extra comfort. However, if it’s the same with your carpet, you need to get rid of it first.
The steps to remove carpet padding are the same as removing the carpet itself, but it’s much easier.
Carpet pads are usually smaller in size, and the material is also much lighter. So you will easily be able to cut up the pieces and remove the pads.
Check the kind of flooring that you have underneath the pads. For example, if it’s a concrete one, then the pad might be glued down, and some chunks can get stuck. Use a floor scraper to get rid of these large chunks.
Over to you
Make sure you remember these few basic steps while tearing your old carpet. They will help you get the job done safely and in minimum time. So don’t wait anymore, and start beautifying your space today!