How To Adjust A Recliner?

A recliner can be one of your most expensive investments, and it can be so frustrating when it starts to get uncomfortable. But the thing is, you don’t have to rush and buy a new one. Instead, you can adjust the pitch, footrest, and tension to get better comfort.

With, are you looking for ways to adjust parts of your recliner? If you own a recliner, sooner or later, you’re going to have to fix it. So, the best way is to learn how to adjust it so that you can rework it according to your preferred comfort.

In this article, we’ll guide you through a detailed explanation of how to adjust a recliner so that when you face a situation, you can fix it like a pro. And since most recliners have thumbscrews and nuts, it makes it much easier to adjust effortlessly.

So, without further ado, let’s get started!

Recliner 101

If you’ve newly bought a best recliner for big and tall man and don’t know how it works, you can follow these simple steps and learn how to operate it.

First thing, remove tables or other furniture pieces and make space so that it’s easier to adjust the recliner. To get started, sit on the chair. You can either use a button or a lever for adjustment. Usually, the lever is placed on the right side of the chair. You can find the controlling button on the side of the chair or armrest. Now all you need is a quiet standing fan so that you can relax completely.

Put some pressure while leaning on the chair if a lever controls the recliner, raise the footrest and pull the lever to adjust it according to your desired position. Once done, release the lever to stop. If buttons control the recliner, lean on the chair, lift the footrest and press the button to recline the chair according to your satisfaction.

To bring the chair back to its original position, lean forward, put pressure on the footrest, and press the button or use the lever. In addition, if you need to adjust the recliner’s tension, search for the nuts or thumbscrews. It should be located on the bottom or at the back.

Besides, you need to rotate the screws or thumbscrews clockwise to increase the tension. Besides, you can reduce the tension turn them anticlockwise.

Let’s start our work

There are a few different ways how you can adjust a recliner. In this article, I will discuss three main methods that will help you to achieve your goal.

Adjusting Recliner Tension

The first way to adjust your recliner is to change the tension. This can be done by rotating the screws or thumbscrews located at the bottom or at the back of the chair. Turning these screws clockwise will increase the tension while turning them anticlockwise will reduce it.

Replacing Tension Springs

It is a little bit hard to conduct, but I will make everything I can to make it easier for you. All you need to do is follow the next steps.

Firstly, remove the cover of the recliner. It should be located at the back of the chair. After that, locate the tension springs and remove them by untwisting them. Now, it is time to replace them with new ones just like you did with your bathtubs. Take your time and make sure they are properly installed. Finally, put the cover back on and enjoy your newly adjusted recliner!

Check out my article about replacing tension springs if you need information in more detail.

Changing Recliner Pitch

The third way to adjust your recliner is to change the pitch. This means that you can change the angle at which the chair sits. To do this, you will need to use a lever or button located on the side of the chair or armrest.

Leaning on the Chair and Adjusting the Recliner

The fourth way to adjust your recliner is by leaning on it and adjusting the footrest. To do this, sit in the chair and remove any tables or other furniture pieces that may be in the way. Then, press down on the chair with your body weight while using your hand to lift up the footrest. You should now be able to adjust it to your desired position. Once done, release your hand and let the footrest go. To return the chair to its original position, lean slightly forward and press down on the footrest with your body weight. You should now be able to press a button or use a lever to do this.

In addition, if you find that the recliner is too stiff, you can loosen the screws or thumbscrews located on the bottom or at the back of the chair. Rotating these screws clockwise will increase the tension while rotating them anticlockwise will reduce it.

I hope this article was helpful and that you are now able to adjust your recliner to your desired position. Thanks for reading!

Leave a Comment