Saving energy at home is beneficial because you will spend less on electricity bills, keep the environment safe, and increase property value. Saving energy at home involves making an upfront investment and replacing old equipment with modern ones.
Energy saving tips.
If you’re looking for cost-effective electric heating solutions to save energy at your home and lower your electricity bills, consider the following tips:
1. Upgrading the components of the HVAC system.
The HVAC system comprises ventilation, heating, and air conditioning equipment. It consumes a lot of electricity in most homes. Upgrading your old HVAC system to energy star-certified equipment will reduce your annual energy bill.
2. Install programmable thermostats.
Depending on your schedule, you can precisely adjust your home’s temperature using a programmable thermostat. You will save money and energy every time the system is switched off or when a degree is reduced. You will save significantly when your house temperature is regulated depending on your needs.
If you are worried about which heater to choose and are confused between an electric or an oil heater, then visit the link to know which kind is best for your home.
3. Use energy-efficient windows.
To keep out drafts and save energy, install double-pane windows. Alternatively, you can add tinting film or solar shades on southern-facing windows to protect your home from being heated up excessively in the summer months.
4. Use a tankless water heating system.
The energy bills increase when hot water is stored in water tanks. To conserve energy while using water tanks, do the following:
- Ensure the hot water tank has an insulation jacket around it.
- The pipes that carry water from the heater to the taps should be insulated.
A tankless water heating system saves energy because water is heated only when you need to use it, so there’s no need for water storage in the tank. When on vacation, turn down gas and electric water heaters to conserve energy.
You will use less energy in your home if you weather-strip your windows and doors. During winter, gaps in the house allow cold air in and warm air out. These gaps can be found between walls and windows, exterior doors and door jambs, or vents. Energy bills will increase because lots of energy is wasted. Use a little caulking or weather stripping to plug the leaks in the gaps. Run your fingers around the edge of windows, ducting, and doors to identify where the cool air is coming from.
6. Install a furnace with high efficiency.
If the furnace of your home heating system hasn’t been properly maintained or cleaned over the years, chances are that it runs at low energy efficiency. Install a modern high-efficiency furnace like the energy star model. You will waste less energy and use less energy.
7. Sealing and insulating the ventilation ducts.
To conserve energy, ensure the ventilation duct that distributes cold and hot air throughout your home is sealed and insulated. To ensure the maximum energy efficiency of the air conditioning and furnace system, you should hire professionals to install the HVAC system. Ensure your air filters are maintained routinely and cleaned regularly by licensed technicians.
While not directly related to heating, installing programmable thermostats can significantly reduce your reliance on appliances by efficiently managing your home’s temperature.
Energy is essential in our everyday lives at home. If you conserve energy, you keep the environment safe and lower electricity bills. The various energy-saving tips include upgrading the components of the HVAC system, sealing and insulating the ventilation ducts, installing a furnace with high efficiency, using a tankless water heating system, installing programmable thermostats, and using energy-efficient windows.